Bendix 800518 MV-3 Control Module – Unthreaded Mounting Holes

Product Description

Manufacturer: Bendix
Part Number: 800518
Condition: New
Bendix MV-3 dash valve kit
Supply Ports: 1/4″ NPT
Delivery Ports: 1/4″ NPT
Exhaust Port: 1/4″ NPT
Aux Port: 1/8″ NPT
1/4″ unthreaded mounting holes


The MV-3 dash control module combines the functions of a PP-1 control valve and a PP-7 trailer supply valve together into a unified device.

The Bendix MV-3 dash control module is a two button, push-pull control valve housed in a single body which includes a dual circuit supply valve and a check valve. The MV-3 valve can duplicate the functions of any existing two or three valve push-pull system and has the advantage of reduced plumbing.

This valve can be used to replace the obsolete Bendix MV-2 P/N 101437. You will also need a 1/8″ NPT to 3/8″ tube 90° fitting for the auxiliary port. Bendix supplies this valve and the required fitting as P/N K095875, but it is less expensive to buy the valve and fitting separately.

Cross References: 065160, 107212, 5005056, 65160, KN20615, S-16988, 5005079 101437, 102027, K095875, 340106, 14309481, 15503262, KN20615, 479301390B, 42042575, K101437, 20QE3187M, 20QE3187RM, 745-101890, 503140C91, 90004988, AV101437, 321569, 401232, 1600664, G15503262
A cross reference listing means that this valve should be a suitable replacement for the part numbers listed. Check the description to be sure this part will work in your application. Some changes in air line plumbing may be required.


There are no reviews yet.

Be the first to review “Bendix 800518 MV-3 Control Module – Unthreaded Mounting Holes”