Zinc-TRAILER JACK-15-inch-Travel
Zinc-TRAILER-JACK-15-inch-Travel-1Zinc-TRAILER-JACK-15-inch-Travel-2Zinc-TRAILER-JACK-15-inch-Travel-3Zinc-TRAILER-JACK-15-inch-Travel-4Zinc-TRAILER-JACK-15-inch-Travel-5Zinc-TRAILER-JACK-15-inch-Travel--6

Zinc Trailer Jack – Sidewind – 15-3/8″ Travel – 2.5K Wholesale

Mail to :wabco@wabco.cn

  • Clearance: 17-1/2″ from center of bracket to top of jack
  • Outer tube width: 2-1/4″
  • Inner tube width: 2″

Product Description

Bolt-on jack has a rust-resistant zinc finish, making it great for marine use. The square design provides superior side-load support. Retracted height is 7-1/4″. Extended height is 22-5/8″. Drop leg offers an extra 13-3/4″ of lift.

Features:

  • Marine jack lets you raise and lower your boat or recreational trailer
  • Footplate minimizes sinking in soft ground
  • Sidewind handle has comfortable, grooved grip
  • Corrosion-resistant clear zinc finish for durability
    • 100-Hour salt spray rating
  • Effortless greasing with built-in grease zerk
  • Bolt-on installation to the side of your trailer
    • Mounting bracket is included

Specs:

  • Application: trailers with a frame height from 2″ to 5″
    • Trailer frame width must be no greater than 3″
  • Bracket height (from bottom of footplate to center of bracket):
    • 7-1/4″ Retracted
    • 22-5/8″ Extended
  • Travel: 15-3/8″
  • Drop leg travel: 13-3/4″
    • Mounting hole spacing: 3-3/8″ from center of hole to center of hole
      • 3-1/2″ Between center of hole on bottom and center of nearest hole
  • Clearance: 17-1/2″ from center of bracket to top of jack
  • Outer tube width: 2-1/4″
  • Inner tube width: 2″
  • Footplate dimensions: 7-1/2″ long x 3-3/4″ wide
  • Mounting bracket dimensions: 6-1/2″ long x 6-1/2″ wide
  • Handle radius: 7-7/8″
  • Lift capacity: 2,500 lbs