Replace Bendix SR-1 Spring Brake Valve

Product Description

  • Manufacturer: Bendix
  • Condition: Remanufactured
  • Bendix reman valves have the same warranty as new valves
  • Reservoir trip pressure = 55 psi

The SR-1 spring brake valve is used in dual or “split” air brake systems equipped with spring brake actuators. The function of the SR-1 valve is to supply a specific, limited hold-off pressure to the spring brakes, and in the event of loss of No. 1 service air pressure, to modulate the spring brakes through the use of the service brake valve.

The valve has four identified 1/4″ NPT ports and a diaphragm protected exhaust port. Two 5/16″ diameter holes are provided in the integral mounting bracket of the valve body. The SR-1 valve must be mounted with the exhaust port down toward the road surface.

Cross References: 286364, 286364R, 104535, 104535X
A cross reference listing means that this valve is a suitable replacement for the part numbers listed. Some changes in air line plumbing may be required.


There are no reviews yet.

Be the first to review “Replace Bendix SR-1 Spring Brake Valve”